Shreveport Home Inspection
Cross Home Inspections LLC includes a professional inspection of:
Foundations
Slab, grading, drainage (better evaluated when inspection is performed during rainy period)
Air Conditioning
Condenser unit, electric disconnect, refrigerant lines, secondary catch pan, float switch, temperature splits
Grounds
Driveways, walkways, retaining walls, decks, railings, stairs, porches, patios, sprinklers
Heating System
Gas unit, electric strip unit, or heat pump with auxiliary or supplemental heat, burners, induced draft fan, combustion air supply, vent pipe, temperature rise
Roof
Roof covering, penetrations, flashings, skylights, dormers, roof vents, gutters, chimney
Heat and Air Distribution System
Air handler, safety switch, plenum, return and supply air duct-work
Exterior
Exterior walls, balconies, siding, trim, exterior doors, hose faucets, outlets, lights
Interior
Fireplace, interior walls, ceilings, ceiling fans, floors, windows, stairs, railings, doors, lights, smoke detectors, laundry room
Garage
Overhead garage door, automatic reverse, automatic opener, eye sensors, floor, walls, ceiling, house/garage entry door, lights
Attic
Roof framing, roof decking, attic insulation, attic ventilation, lights
Plumbing
Supply and drain piping, vent piping, exterior hose faucets, functional water flow @ sinks/showers/tubs, traps, drains, water heater, gas meter
Kitchen
Cabinets, drawers, sinks, all built in appliances including cooktop, vent hood, range/oven, dishwasher, microwave, disposal, trash compactor, refrigerator/freezer, ice maker
Electrical
Service entrance conductor wires including overhead or lateral, meter base, main electric panel, sub panel, breaker size vs wire gauge, wiring, wire type, polarity and grounding all of outlets tested, GFCI outlets, light switches
Bathrooms
Bathroom ventilation, sinks, bathtubs, showers, toilets
NOTE: If any of the systems and components mentioned above are concealed or not accessible during inspection they can’t be inspected.
Cross Home Inspections LLC will recommend a mold test if visible evidence of suspected mold growth is observed during an inspection.
